Charging pad
7-inch FPV Drone
Fifteen-plus parts, sourced and wired by hand, tuned until it flew clean.
- When
- 2023
- Built with
- Betaflight
- C++
What I did
- Built from 15+ separate parts: flight controller, 4-in-1 ESC, four brushless motors, VTX, and camera.
- Worked out cable routing, connectors, and power distribution in a tight frame. Following the datasheets saved a motor at least once.
- Tuned PID in Betaflight across 5+ flights until it held a stable hover and flew cleanly on FPV.